So, how much do frameless shower doors cost? We get this question almost every single day, usually right after someone’s opened three browser tabs and found three totally different numbers. Here’s the truth: the price depends on your glass, your hardware, and the shape of your shower, not some flat number a calculator spits out. We’ve priced out hundreds of these jobs across Toronto and the GTA, and we’re going to walk you through the real numbers, what pushes the price up, and where you can actually save.
What Actually Drives the Price
Four things move the number more than anything else.
Glass thickness. Most frameless doors use 3/8 inch glass. Bump up to 1/2 inch and you’ll pay more per square foot, though you do get a sturdier, more solid feel.
Size and shape. A single fixed panel costs less than a full enclosure. Corner units and neo-angle doors need extra custom glass and extra labor, so the price climbs fast.
Hardware finish. Chrome sits at the affordable end. Matte black and brushed nickel usually run a bit higher.
Your walls. Older homes with walls that aren’t quite straight often need extra prep before the glass ever gets measured. That’s a cost most online price calculators forget to mention.
The Real Numbers: Cost by Enclosure Type
Here’s what we actually see on invoices across the GTA.
| Enclosure Type | What You Get | Installed Cost (GTA) |
| Single fixed panel | One glass panel, no door | $850 – $1,500 |
| Inline door + panel | One door, one fixed side panel | $1,800 – $3,000 |
| Corner or neo-angle | Two panels meeting at an angle, custom cut | $2,800 – $4,500 |
| Steam shower enclosure | Sealed top and bottom to trap steam | Add about 25% to the base price |
Glass itself runs $40 to $60 per square foot depending on thickness and finish. Clear 10mm glass sits at the low end. Smoked, fluted, or reeded glass costs more. Labor typically adds a few hundred dollars on top of that, and more if your walls need correcting first.
So, How Much Do Frameless Shower Doors Cost Once You Add It All Up?
Add it up and most GTA homeowners land somewhere between $1,800 and $4,500 installed for a standard frameless enclosure. Small, simple, single-panel jobs can come in under $1,500. Large, custom corner units with premium hardware push toward $5,000 or more. If someone quotes you $700 for a full frameless enclosure, ask what’s missing from that number. It’s usually the glass certification, the hardware quality, or the labor.
Insider Tips to Keep the Cost Down
We’ve seen homeowners save real money without cutting corners. A few things that actually work:
- Stick to a single inline door instead of a full corner enclosure if your layout allows it.
- Choose 10mm glass over 12mm unless you specifically want the heavier, thicker feel.
- Book your wall measurement early. Fixing an out-of-plumb wall costs less before your tile goes in, not after.
- Skip the fully custom etched or frosted glass if a clear panel with a protective coating does the same job for less.
- Get one detailed, itemized quote instead of three vague ones. It makes comparing prices actually possible.
The Bottom Line
So, how much do frameless shower doors cost? Somewhere between $850 for a single panel and $4,500 or more for a full custom enclosure, with most GTA homeowners landing right in the middle. The only way to get your real number is a proper measurement. We’ll come take a look and give you one straight, itemized quote, not a guess.
FAQ
Why do some frameless shower door quotes seem so much cheaper than others? Usually because something’s missing. A lowball quote might skip the glass certification, use lighter hardware, or leave out a wall correction you’ll need anyway. Ask for an itemized breakdown before you compare prices.
Does glass thickness really change the price that much? Yes. Moving from 3/8 inch to 1/2 inch glass adds real cost per square foot, and the heavier panel needs sturdier hardware to hold it safely. Most bathrooms don’t need the upgrade, but some homeowners prefer the look and feel.
Is a corner or neo-angle enclosure much pricier than a straight door? Yes, often by $1,000 or more. Angled cuts and extra panels take more glass and more labor to get right.
Do I need to budget extra for uneven walls? If your home is older, plan for it. Out-of-plumb walls sometimes need correction before the glass can sit flush, and that’s a cost separate from the door itself.
Can I save money by going frameless on just one panel instead of a full enclosure? Yes. A single fixed panel is one of the cheapest ways to get the frameless look without paying for a full custom enclosure.
How much should I set aside for a standard frameless shower door in the GTA? Plan for $1,800 to $4,500 installed for a typical inline or corner enclosure. Simpler layouts can come in lower, and premium glass or hardware pushes it higher.
